Dendrimer container for anion-responsive lanthanide complexation and "on-off" switchable near-infrared luminescence

A new dendrimer-type ligand dynamically switched the lanthanide complexation and luminescence profiles in response to external anions.     

Synthesis, structures, and properties of meso-phosphorylporphyrins: self-organization through P-oxo-zinc coordination

The synthesis, structures, and optical and electrochemical properties of meso-phosphorylporphyrins are described. The copper-catalyzed carbon-phosphorus cross-coupling reaction of a meso-iodoporphyrin with di-n-butyl phosphite and diphenylphosphane oxide has proved to be an efficient and general method for the synthesis of meso-phosphorylporphyrins. Zinc phosphorylporphyrins thus obtained readily undergo self-organization through P-oxo-Zn coordination to form noncovalently linked, cofacial porphyrin dimers or linear oligomers, which have been characterized by spectroscopic methods and X-ray crystallographic analyses. In toluene, CH(2)Cl(2), and CHCl(3), the zinc phosphorylporphyrins exist mostly as dimers or monomers, depending on their concentrations, the temperature, and the presence of additives. The self-association constants for dimerization in toluene have been determined by UV/Vis absorption titration measurements. The meso-diphenylphosphorylporphyrin dimer displays excitonic coupling of the Soret band with a splitting energy of 940 cm(-1). Fluorescence lifetimes of the zinc phosphorylporphyrins have been found to be affected only slightly by the concentration of the solution, and by the addition of triphenylphosphane oxide, suggesting that the effect of dimerization on their photodynamics in the S(1) state is negligible. On the other hand, the effect of dimerization is clearly reflected in their electrochemical oxidation processes, as the initially produced radical cations are efficiently delocalized over the two porphyrin rings. These findings demonstrate the potential utility of meso-phosphorylporphyrins as new models for the special pair in photosynthesis and as new building blocks for porphyrin-based supramolecular materials.     

Lipase-catalyzed asymmetric synthesis of desprenyl-carquinostatin A and descycloavandulyl-lavanduquinocin

An asymmetric synthesis of the core carbazole structure, 6-desprenyl-carquinostatin 3 and 6-descycloavandulyl-lavanduquinocin 3, toward a total synthesis of carquinostatin A (1) and lavanduquinocin (2), has been established. Lipase QLM (Meito) catalyzed enantioselective acetylation of the racemic alcohol 6 gave the (-)-acetate 7 and the (+)-alcohol 6 with high enantioselectivity. The absolute stereochemistry of the (-)- and (+)-alcohol 6 have been determined to be R- and S-configurations, respectively, by the advanced Mosher method. In the same manner, the (-)-acetate 13 and the (+)-alcohol 12 have been obtained from the racemic alcohol 12. The (R)-(-)-acetate 13, derived from the (R)-(-)-acetate 7, was the same as the (-)-acetate 13, which has been determined to be (R)-configuration. Oxidation of the (R)-(-)-acetate 13 followed by hydrolysis afforded (R)-(-)-6-desprenyl-carquinostatin [and (R)-(-)-6-descycloavandulyl-lavanduquinocin] 3. In addition, oxidation of the (S)-(+)-alcohol 12 provided (S)-(+)-3, which is the enantiomer of 6-desprenyl-carquinostatin A (R)-(-)-3.     

Molecular complex consisting of two typical external medicines: intermolecular interaction between indomethacin and lidocaine

The molecular complex formed between indomethacin (IDM) and lidocaine (LDC), which are typical external medicines, was studied. A thermal analysis, microscopic study and phase solubility technique suggested intermolecular interaction between IDM and LDC. The phase solubility profiles with IDM and LDC were classified as A(L)-type, indicating the formation of a 1 : 1 stoichiometric molecular complex. The apparent stability constant (K(S)), calculated from the slope and the intercept, was 4478.9 M(-1). A molecular ion peak was detected at 592.2 (m/z) from fast-atom bombardment-MS measurements, which was in accordance with the sum of the molecular weight for IDM (M(W): 357.81) and LDC (M(W): 234.38). The changes of IR spectra in the C=O stretching region showed that each intact hydrogen bond network was collapsed in the IDM-LDC system and strong interaction between IDM and LDC formed after their kneading. From the (1)H-NMR analyses, it was estimated that the dominant interactive site was the IDM carboxylic acid group which associated with the LDC diethyl amino group non-covalently.     

Halorhodopsin from natronomonas pharaonis forms a trimer even in the presence of a detergent, dodecyl-beta-D-maltoside

Halorhodopsin (HR) is a transmembrane seven-helix retinal protein, and acts as an inward light-driven Cl⁻ pump. HR from Natronomonas pharaonis (NpHR) can be expressed in Escherichia coli inner membrane in large quantities. Here, we showed that NpHR forms the trimer structure even in the presence of 0.1% (2 m m ) to 1% (20 m m ) dodecyl-β- d -maltoside (DDM), whose concentrations are much higher than the critical micelle concentration (0.17 m m ). This conclusion was drawn from the following observations. (1) NpHR in the DDM solution showed an exciton-coupling circular dichroism (CD) spectrum. (2) From the elution volume of gel filtration, the molecular mass of the NpHR–DDM complex was estimated. After evaluation of the mass of the bound DDM molecules, the mass of NpHR calculated was approximately equal to that of the trimer. (3) The cross-linked NpHR by glutaraldehyde gave the SDS-PAGE corresponding to the trimer. Mass spectra of these samples also support the notion of the trimer. Using the membrane fractions expressing NpHR ( Escherichia coli and Halobacterium salinarum ), CD spectra showed exciton-coupling, which suggests strongly the trimer structure in the cell membrane.     

Analysis on heat stress-induced hyperphosphorylation of stathmin at serine 37 in Jurkat cells by means of two-dimensional gel electrophoresis and tandem mass spectrometry

Two-dimensional gel electrophoresis (2-DE) and tandem mass spectrometry were successfully used for determination of a phosphorylation site of stathmin induced by heat stress to Jurkat cells of a human T lymphoblastic cell line. The cells were incubated for 30 min at 41 degrees C up to 45 degrees C in a serum free 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffered culture medium. The intracellular soluble proteins were separated by 2-DE, and some of the proteins increased their abundance by heat stress. Those proteins were identified to be calmodulin, protein kinase C substrate, thymosin beta-4 and F-actin capping protein beta-subunit by peptide mass fingerprinting (PMF) with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). On the contrary, protein phosphatase 2C gamma-isoform, nucleophosmin, translationally controlled tumor protein, Rho GDP-dissociation inhibitor-1, eukaryotic translation initiation factors 5A and 3A subunit 2, ubiquitin-like protein SMT 3B and chloride intracellular channel protein-1 were decreased their abundance. A protein spot of M(r) 18,000 and pI 5.9 was markedly increased at temperatures higher than 43 degrees C at which the cells were led to apoptosis. The spot was identified to be stathmin of a signal relay protein which has a function of sequestering microtubule. MALDI-quadrupole ion trap (QIT)-TOF-MS/MS and immunoblotting with a monoclonal antibody specific for a phosphorylation site of stathmin showed that the spot was a phosphorylated stathmin at serine 37 (Ser 37). The phosphorylation was suppressed by treatment of cells with olomoucine of an inhibitor specific for cyclin dependent kinase (Cdk-1). These results strongly suggest that heat stress activates Cdk-1 which phosphorylates Ser 37 on the stathmin molecule. The phosphorylation may cause the functional loss of stathmin for dynamic microtubule assembly and leads Jurkat cells to cell cycle arrest and apoptosis.     

Single-vesicle estimation of ATP-binding cassette transporters in microfluidic channels

We have developed a method to analyze the substrate transport of ATP-binding cassette (ABC) transporters, which are associated with drug resistance in tumor cells. Our microfluidic method is well suited to the single-vesicle estimation of substrate transport and the rapid drug screening of ABC transporters. Using this method, we have demonstrated, for the first time, the analysis of substrate transport by a single transporter and performed drug-inhibition experiments in less than 3 h.     

Optical properties of Au–Ag core–shell nanorods on glass and ITO substrates

Gold-silver core–shell nanorods were deposited on glass and ITO plates. SEM observations indicated that some of these nanorods were standing on the ITO plate. The extinction spectra of the plates were measured by varying the angles of incidence of p-polarized monitor light. Deconvolution of these spectra gave six bands in the visible region. The dependence of the peak intensities on the incident angles indicated that the bands at 390 and 420 nm originated from surface plasmon bands in the transverse direction of the nanorods.     

Sodium methoxide: a simple but highly efficient catalyst for the direct amidation of esters

A simple NaOMe catalyst provides superior accessibility to a wide variety of functionalized amides including peptides through direct amination of esters in an atom-economical and environmentally benign way.     

Preparation of hollow titania and strontium titanate spheres using sol–gel derived silica gel particles as templates

A facile approach, based on polyelectrolyte-mediated electrostatic adsorption of a water-soluble titanium complex on colloidal templates and hydrothermal treatment, is presented for the formation of hollow titania (TiO₂) and strontium titanate (SrTiO₃) spheres. Monodispersed silica gel particles were prepared by the sol?Cgel method and adopted as core templates. Deposition of a water-soluble titanium complex, titanium (IV) bis(ammoniumlactato)dihydroxide (TALH), on the silica gel particles was carried out via the layer-by-layer assembly technique. Hollow spheres were successfully formed from the core?Cshell particles. The silica gel particles used as core templates dissolved during hydrothermal treatment because of the particles?? undeveloped siloxane network. In addition, the hydrothermal treatment induced crystallization of the hollow shells. Therefore, the hydrothermal treatment played two roles; removal of the silica templates and crystallization of the hollow shells. When deionized water was used, hollow TiO₂ spheres were obtained. Hollow SrTiO₃ spheres could also be formed when an aqueous solution of Sr(OH)₂ was used. The approach presented here could be exploited as a novel and sustainable approach for the fabrication of a range of different inorganic hollow spheres.